Tokenless two factor authentication for disaster recovery and business continuity.
When freak weather hits, transport strikes disrupt commuters or the threat of terrorist attacks occur; the need for secure immediate access is at its greatest. Allowing office users to gain immediate remote access with a password alone, isn't strong enough.
- On premises software or hosted via managed provider
- Communicate with employees in the case of an emergency; what the outage is and what action to take!
- Use your mobile phone instead of a traditional hardware token in the case of an emergency
- Easiest 2FA logon experience in the industry
- Automatically deploy ICE users via LDAP group membership
- Deployment can scale to 100,000 users per hour
- Fixed yearly cost, pay per user, with no hidden extras
SecurICE Overview Video
Tokenless® 2FA for disaster recovery and business continuity
Maintain Secure Access for users during an Emergency
In the event of an emergency, many organisations allow remote users to authenticate with a standard password. But this is when the need for secured access is at its highest: during emergency situations corporate defences are at their weakest and the threat from attack at its greatest.
SecurIce from SecurEnvoy is a revolutionary approach to the age-old problem of providing secure access to corporate systems in the event of an emergency - without the need for fobs, tokens or smartcards.
ICE provides clients with the ability to turn on strong, multi factor authentication for users in the event of an emergency. The user's existing Microsoft password is the first factor, and a passcode sent to the user's mobile phone is the second. There is no need for the user to enrol and remember an additional PIN, and no need for extra tokens or smartcards - the perfect emergency two-factor authentication system.
Eliminate Delays Caused by Poor Mobile Phone Reception Areas
Configurable warning disaster messages along with passcodes are sent via SMS to an entire organisation or a pre-identified group of users with one click from the SecurEnvoy Deployment Wizard. The end user simply connects to their protected company resource.
The SMS can be sent in realtime or preloaded. If numerous failed authentications are entered, the end user is disabled and no new passcodes will be sent. This security measure prevents hackers running brute force attacks.
Benefits to Users:
- End user doesn't need to remember an additional secret piece of information as they can reuse the Microsoft or LDAP password.
- End users only needs to enter one thing they know rather than two pieces of information as many other 2 factor authentication systems require a separate PIN.
- All a user needs to do is read an industry standard 6 digit passcode from their phone. The user does not need to perform any mathematical manipulation to derive their passcode.
- End user does not need to carry additional authentication devices.
- Dynamically updating the previous SMS message removes the need to delete old text messages
- Soft Token application available to all smart phones and desktop/laptop environments
Benefits to the business:
- Any mobile phone that can receive an SMS message is supported without any SMS delivery delay issues affecting performance. This approach expands the range of users to include not only internal staff but also third-parties and even consumers.
- No token deployment or replacement costs.
- No token resynchronisation or PIN resets reduces the cost of helpdesk administration
- Deployment to thousands of users in minutes via SecurEnvoy's deployment wizard cuts down the cost of deploying and supporting two factor authentications.
- The personal security paid to a users mobile phone far exceeds that paid to a hardware token they are forced to carry. End users are more likely to notice their mobile phone has been stolen and more importantly are far more likely to report it missing. Therefore providing enhanced security to the business over token based solutions.
- Windows Server 2008
- Windows Server 2008R2
- Windows Server 2012
- Windows Server 2012 R2
- Windows Server 2016
For detailed integration guides see www.securenvoy.com/support/integration-guides
SecurEnvoy uses your existing company's LDAP server as its database, no schema changes requiredSupported LDAP Types:
- Microsoft Active Directory
- Novell e-Directory
- Sun Directory Server
- SecurEnvoy Managed Users via Microsoft Lightweight Directory Service (LDS or ADAM)
- Other LDAP Compliant servers
- Passcode Generation utilises FIPS 140-2 approved algorithm
- Brute force attack protection
- All user data is stored with AES 256 bit encryption
- Phishing Attack Prevention
- Intrusion Prevention
- Key Stroke Logging Defence
- Lost or Stolen Mobile Phone is disabled at the server.
- Cookie high-jacking defence
- Cross site scripting defence
SecurEnvoy support the following PIN (Personal Identification Number) methods
- Utilising the existing LDAP password as the PIN (removes the overhead on users)
- Supports the traditional 4-8 numeric or alphanumeric PIN with or without the LDAP password combination
- A full complement of apps are available for all device types. No mobile data is used nor does the user have to be online.
- SMS messages delivered via a GSM commercial strength modem , supported modems: Multitech, Wavecom, Siemens
- SMS message via hardware modem rack
- SMS messages via a third party web gateway
- Email Passcodes
- VoIP Phone calls
- Pre-loaded passcode, sent after each authentication attempt with the new SMS messages automatically updating previously stored message. This mode eliminates SMS delivery delays and intermittent loss of signal
- Real Time Passcodes with support for SMS Flash Messages and session locking
- Day Codes
- Multiple Day Codes
- Temporary time limited Codes that automatically switch back to a one time codes after expiry
- Seamlessly supports enterprises moving from a password system to SecurEnvoy Tokenless Solution
- Seamlessly supports enterprises moving from an existing third party token solution to SecurEnvoy Tokenless Solution
- Automatic mass deployment of up to 100k users per hour, dependent on LDAP or group membership
- Simple and elegant deployment tools to deploy tens of users to tens of thousands.
- Self enrolment is available and intuitive for the user
- Movement from one device to another is supported as often as the user wishes or the administration allows.
- Moving between devices won’t leave the user's identity behind and alleviates identity theft.
(click headings to expand section)
Enterprise Class Solution
Full multi-domain support with redundancy and fault tolerance built-in.
"particulary well suited to businesses with a large remote workforce"ComputingSecurity
SecurEnvoy harness the power and scalability of Active Directory or other LDAP based servers as its core database. All replication is performed by the operating system siftware (domain controllers).
SecurEnvoy's radius server can scale to over 50 authentications per second. It utilises Microsoft's next generation .net framework and LDAP services.
As the next required user's passcode is not needed until the next authentication, any buffered delay at peak loads in sending the next SMS passcode message will not affect authentication performance.
The only limitation imposed on scaling the system is the number of users that Active Directory (or other LDAP servers) can manage in any single domain.
Each site is designed with two authentication servers such that if one of these servers failed or its delivery SMS gateway was unable to send SMS messages then this server will drop the incoming authenticate request. This action will cause the VPN radius client or IIS Agent to fail over to the next configured SecurEnvoy server. Note that as this solution is priced per user, additional servers can be added if required at no additional cost.
All user authentication data is stored and replicated in real time by Active Directory with each SecurEnvoy server being configured for up to two Microsoft domain controllers such that if an existing domain controller fails then SecurEnvoy ‘s server will fail over to the next configured domain controller.
SecurEnvoy is supported on clustered servers if required.
Failover between sites is supported out the box with no additional development required as follows:
If a user from one site authenticates at a second site and is in the same domain then Active Directory (or other LDAP server) synchronisation will ensure that the required authentication information is available at both sites and thus will be available to SecurEnvoy's authentication server.
Multiple SMS Gateways can be configured with fail-over.
Each SMS Gateway is continually checked for correct operation. If one fails for example the power is removed from a connected SMS modem, then this gateway is poled every 60 seconds with reset and initialisation commands.
Multi Domain Support
Each SecurEnvoy security server can be configured with two domain controllers for each domain your company uses with no limit on the number of domains. The domain component of the userID is then used to dynamically switch the security server to the relevant domain. If no domain component is given in the userID then a default domain is used. Default domains are set at each radius client configuration such that each connecting VPN server can be configured with a separate default domain.
The only on going administration tasks required are the following:
- Re-enable lockout account that have failed too many authentications since the last good one
- Update users mobile numbers (can be self managed via help desk if required)
- Enable temporary emergency access if a mobile phone is lost (can also be self managed via help desk)
SecurEnvoy supports role based administration with these roles:
- Full Admin: Access to all admin GUI functions including server configuration,log, radius and user setting.
- Help Desk: Can only access user setting and log information
- Help Desk Groups: Can only administer users that are a member of an Active Directory (or other LDAP) group or sub nested group.
- Config: System configuration settings only, no access to user authentication
Administration overhead functions are kept to in minimum as end user information is already available in Active Directory, no token management or resynchronisation is required and no PIN management is required.
In addition, temporary emergency access codes automatically switch back to one time codes after the administrator defined number of days. As user information is stored in AD then any users deleted from Active Directory will be deleted from SecurEnvoy.
Centralised management is support in the following way. Each security server can manage any user in any domain with remote administration being accessed via a browser (IE6, IE7, IE8 or Firefox).
Two-Factor Authentication for Regulatory Compliance
Businesses and Organisations are no longer able to ignore Two-factor authentication. It is now a major part of all users day-to-day work and home lives. Compliance and regulatory standards have to be met and adhered to.
SecurEnvoy is the most flexible and cost effective solution in the Two-factor market. SecurEnvoy provides Tokenless Two Factor solutions that meet and exceed regulatory compliance such as PCI Data Security Standards, GCSx CoCo, HIPAA, SOX, ISO 27001, and other industry regulations.
- PCI Data Security Standards,
- ISO 27001,
SecurEnvoy has a suite of Tokenless Two Factor authentication solutions that can leverage devices an end user has access to, in their day day work. This can be a mobile phone, a physical landline or direct dial extension or a device such as a tablet or P.C. SecurEnvoy are just not limited to a mobile phone, but provides solutions for how users like to work and with what devices.